水利水电工程施工安全技术通则
水利水电工程施工人员安全技术操作规程
1范围
本标准规定了水利施工人员安全文明施工行业标准。
本标准适用于大中型水电水利工程现场作业人员的安全技术管理、安全防护和安全文明施工,小水电水利工程可参照执行。
2规范性引用文件
下列文件中的条款通过引用而成为本标准的条款。凡是注日期的引用文件,所有随后的修改件(不包括勘误表)或修订本均不适用于本标准。但是,根据本标准达成协议的研究机构是否可以使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
Gb4792辐射防护基本标准
起重指挥信号(GB 5082)
起重机安全规程Gb5144
Gb5306《特种作业人员安全技术考核管理细则》
GB 11375热喷涂作业安全
GB 13349爆破安全规程
Gb5162《水利水电工程施工安全防护设施技术规范》
JG80《高处作业安全技术规程》
DL/t5370《水利水电工程施工安全技术通则》
DL/t5371水利水电工程土建施工安全技术规程
DL/t5372水利水电工程金属结构及机电设备安装安全技术规程
3概述
3.0.1为贯彻安全第一、预防为主、综合治理的国家安全生产方针,坚持以人为本的安全理念,规范水电水利工程施工现场作业人员的安全文明施工标准,控制事故发生发生各种事故,确保施工人员的安全健康,确保安全生产,特制定本标准。
3.0.2本标准以《中华人民共和国安全生产法》、《国务院建设工程安全生产管理条例》等一系列国家安全生产法律法规为依据,根据现行水电水利工程安全技术规程和有关施工机械设备运行维护规程的要求编制。
3.0.3本标准规定了水电水利工程施工人员安全文明施工行为规范。
3.0.4本标准适用于大中型水电水利工程现场作业人员的安全技术管理、安全防护、安全文明施工,小水电水利工程可参照执行。
3.0.5参加水电水利工程施工的人员,应熟悉本专业工程的安全技术,严格遵守本工种的安全操作规程,熟悉,掌握并遵守配合作业的相关项目的安全操作规程。
3.0.6施工队坚持每日三项工作活动和每周安全日的安全生产前会、工作中巡回检查和安全生产后总结活动。
3.0.7施工企业应坚持定期培训的教育制度,施工人员每年对本专业的安全技术和标准进行一次学习、培训和考核。考核不合格的,不准上岗。
General safety technical specification for water conservancy and Hydropower Engineering Construction
Safety technical operation regulations for construction workers of water conservancy and hydropower projects
1 Scope
This standard specifies the industry standards for safe and civilized construction of water conservancy construction workers.
This standard is applicable to the safety technology management, safety protection and safe and civilized construction of site operators of large and medium-sized hydropower and water conservancy projects, and can be referred to for small hydropower and water conservancy projects.
2 normative references
The clauses in the following documents become the clauses of this standard by reference. For dated references, all subsequent amendments (excluding corrigenda) or revisions are not applicable to this standard. However, whether the latest versions of these documents can be used by the research institutions that reach an agreement according to this standard. For undated references, the latest edition is applicable to this standard.
Gb4792 basic standard for radiological protection
Command signal of hoisting (GB 5082)
Gb5144 safety regulations for cranes
Gb5306 management rules for safety technical assessment of special operation personnel
GB 11375 thermal spraying operation safety
GB 13349 safety blasting regulation
Gb5162 technical code for construction safety protection facilities of water conservancy and hydropower projects
Jgj80 safety technical specification for construction work at height
DL / t5370 general safety technical specification for water conservancy and Hydropower Engineering Construction
DL / t5371 safety technical specification for civil construction of water conservancy and hydropower projects
DL / t5372 safety technical specification for metal structure and electromechanical equipment installation of water conservancy and hydropower projects
3 general
3.0.1 in order to implement the national safety production policy of "safety first, prevention first and comprehensive treatment", adhere to the safety concept of "people-oriented", and standardize the safety and civilized construction criteria of operators on the construction site of hydropower and water conservancy projects, so as to control the occurrence of various accidents, ensure the safety and health of construction personnel, and ensure safe production, this standard is hereby formulated.
3.0.2 this standard is based on a series of national laws and regulations on work safety, such as the law of the people's Republic of China on work safety, the regulations on the administration of work safety of construction projects issued by the State Council, and is compiled in accordance with the requirements of the current safety technical regulations for hydropower and water conservancy projects and the operation and maintenance regulations for relevant construction machinery and equipment.
3.0.3 this standard specifies the code of conduct for safe and civilized construction of construction workers participating in hydropower and water conservancy projects.
3.0.4 this standard is applicable to the safety technology management, safety protection, safe and civilized construction of site operators of large and medium-sized hydropower and water conservancy projects, and can be referred to for small hydropower and water conservancy projects.
3.0.5 the personnel participating in the construction of hydropower and water conservancy projects should be familiar with the safety technology of the professional project, strictly abide by the safety operation regulations of the work type, and be familiar with, master and abide by the safety operation regulations of the relevant projects cooperating with the operation.
3.0.6 the construction team shall adhere to the daily "three work activities" and weekly "safety day" activities of pre work safety meeting, in work patrol inspection and post work safety summary.
3.0.7 the construction enterprise shall adhere to the education system of regular training, and the construction workers shall study, train and assess the safety technology and standards of the specialty once a year. Those who fail to pass the assessment shall not be allowed to work.
水利水电工程施工通用安全技术规程
水利水电工程施工作业人员安全技术操作规程
1 范围
本标准规定了参加水利工程施工作业人员安全、文明施工的行业标准。
本标准适用于大中型水电水利工程现场作业人员安全技术管理、安全防护与安全、文明施工,小型水电水利工程可参照执行。
2 规范性引用文件
下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包含勘误的内容)或修订版均不适用于本标准,然而,根据本标准达成协议的各研究机构是否可使用这些文件的最新版本。凡是不注明日期的引用文件,其最新版本适用于本标准。
GB4792 放射卫生防护基本标准
GB5082起重吊运指挥信号
GB5144 起重机安全规程
GB5306 特种作业人员安全技术考核管理规则
GB11375 热喷涂操作安全
GB13349 爆破安全规程
GB5162 水利水电工程施工安全防护设施技术规范
JGJ80 建筑施工高处作业安全技术规程
DL/T5370 水利水电工程施工通用安全技术规程
DL/T5371 水利水电工程土建施工安全技术规程
DL/T5372 水利水电工程金属结构与机电设备安装安全技术规程
3 总则
3.0.1 为了贯彻执行国家安全第一、预防为主、综合治理的安全生产方针,坚持以人为本的安全理念,规范水电水利工程施工现场作业人员的安全、文明施工准则,以控制各类事故的发生,确保施工人员的安全、健康,确保安全生产,特制定本标准。
3.0.2 本标准以《中华人名共和国安全生产法》、国务院颁布的《建设工程安全生产管理条例》等一系列国家安全生产的法律法规为依据,并遵照水电水利工程施工现行安全技术规程及相关施工机械设备运行、保养规程的要求进行编制。
3.0.3 本标准规定了参加水电水利工程施工作业人员安全、文明施工的行为规范。
3.0.4 本标准适用于大中型水电水利工程现场作业人员安全技术管理,安全防护,安全、文明施工,小型水电水利工程可参照执行。
3.0.5 参加水电水利工程施工的人员应熟悉掌握本专业工程的安全技术要去,严格遵守本工种的安全操作规程,并应熟悉、掌握和遵守配合作业的相关工程的安全操作规程。
3.0.6 施工班组应坚持执行工前安全会、工中巡回检查和工后安全小结的每日三工活动和每周一次的安全日活动。
3.0.7 施工企业应坚持定期培训的教育制度,施工作业人员应每年进行一次本专业安全技术和本标准的学习、培训和考核,考核不合格者不能上岗。
厂家电话:4000038122(点击拨打)
最新报价:13966784488(微信同号)

发表评论 取消回复