PVC-U排水管材管件，PVC排水管，PVC排水管厂家

PVC-U排水管材管件，PVC排水管，PVC排水管厂家

产品介绍

PWC-U啡水管是以卫生级聚氯乙烯（PVC）树脂为主要原料，加入适量的稳定剂、润滑剂、填充剂、增色剂等经塑料挤出机挤出成型和注塑机注塑成型，通过冷却、固化、定型、检验、包装等工序以完成管材、管件的生产。物化性能优良，耐化学腐蚀，抗冲强度高，流体阻力小，较同口径铸铁管流量提高30%，耐老化，使用寿命长，被广泛应用于建筑物内外或埋地排水，工业排污，通风管道等各类系统。

产品信息/执行标准

建筑排水用硬聚氯乙烯（PVC-U）管材 GB/T 5836.1-2018

建筑排水用硬聚氯乙烯（PVC-U管件 GB/T 5836.2-2018

产品名称：PVC-U全塑排水管

产品原料：PVC-U硬聚氯乙烯

产品特性：抗紫外线 耐腐抗冲压水密性好安全耐用

产品用途：工业与民用建筑室内外排水管道工程等

执行标准：GB/T5836.1-2018建筑排水用硬聚氯乙烯（PVC-U）管材

产品特点

特点关键词∶安全、寿命长、耐腐蚀、自熄性、抗冰冻、安装方便、水密性

1、管材表面硬度和抗拉强度优，管道安全系数高。

2、抗老化性好。

3、管道摩阻系数小，水流顺畅，不易堵塞，养护工作量少。

4、耐腐蚀性、耐药品性优良。PVC-U管材具有优异的耐酸、耐碱、耐腐蚀性，不受潮湿水份和土壤酸碱度的影响，管道铺设时不需要任何防腐蚀处理。 5、材料氧指数高，具有自熄性。

6、管道线膨胀系数小，为0.07mm/℃，受温度影响变形量小。导热系数和弹性模量小，与铸铁排水管相比抗冰冻性能优良。

7、管材、管件连接可采用胶水粘接，施工方法简单，操作方便，安装工效高。

8、具有良好的水密性∶PVC-U管材的安装，不论采用胶水粘接还是橡胶圈连接，均具有良好的水密性。

产品用途

1、可广泛应用于市政工程、建筑工程、工业、农业、园地工程、道路工程等领域。

2、工业与民用建筑室内外排水管道工程，连续排入生活污水温度不远大于40 ℃，瞬间废弃污水温度不远大于80 ℃，对干管材不起生锈作用的工业废水均可使用。

运输安装

1、连接前将管道插口，管件承口擦拭干净

2、测量承口的深度在管材做好标记

3、涂刷胶粘剂，先涂承口，后涂插口，涂层均匀，适量

4、对准方向，一次插入到划线部分，旋转1/4圈

5、将接口处多余的胶粘剂擦拭干净

6、将粘好的管道静置到接口固化管材的切割∶管材量取合适的长度后，可用手工锯或者机器切割，切割后两段应保持平整，用蝴蝶锉锉去毛边并倒角，倒角不宜过大。

PVC-U drainage pipe fittings, PVC drainage pipes, PVC drainage pipe manufacturers

product description

PWC-U brown water pipe is made of sanitary polyvinyl chloride (PVC) resin as the main raw material, added with appropriate stabilizers, lubricants, fillers, color enhancers, etc., is extruded by a plastic extruder and injection molded by an injection molding machine. Cooling, solidification, shaping, inspection, packaging and other processes to complete the production of pipes and fittings. Excellent physical and chemical properties, chemical corrosion resistance, high impact strength, low fluid resistance, 30% increase in flow rate compared with cast iron pipes of the same diameter, aging resistance, long service life, widely used in buildings inside and outside or buried drainage, industrial sewage, and ventilation Various systems such as pipelines.

Product Information/Executive Standard

Unplasticized polyvinyl chloride (PVC-U) pipes for building drainage GB/T 5836.1-2018

Unplasticized polyvinyl chloride (PVC-U pipe fittings) for building drainage GB/T 5836.2-2018

Product Name: PVC-U Plastic Drainage Pipe

Product material: PVC-U rigid polyvinyl chloride

Product features: UV resistance, corrosion resistance, stamping resistance, good water tightness, safety and durability

Product use: indoor and outdoor drainage pipeline engineering of industrial and civil buildings, etc.

Executive standard: GB/T5836.1-2018 Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Building Drainage

Features

Feature keywords: safety, long life, corrosion resistance, self-extinguishing, anti-freezing, easy installation, water tightness

1. The surface hardness and tensile strength of the pipe are excellent, and the safety factor of the pipe is high.

2. Good aging resistance.

3. The pipe friction coefficient is small, the water flow is smooth, not easy to be blocked, and the maintenance workload is small.

4. Excellent corrosion resistance and chemical resistance. PVC-U pipes have excellent acid resistance, alkali resistance, and corrosion resistance, and are not affected by damp water and soil pH. No anti-corrosion treatment is required when laying pipes. 5. The material has high oxygen index and self-extinguishing.

6. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the amount of deformation affected by the temperature is small. The thermal conductivity and elastic modulus are small, and the anti-freezing performance is better than that of cast iron drain pipes.

7. The connection of pipes and pipe fittings can be glued. The construction method is simple, the operation is convenient, and the installation work efficiency is high.

8. Good water tightness: The installation of PVC-U pipes, whether glued or connected by rubber rings, has good water tightness.

Product Usage

1. It can be widely used in municipal engineering, construction engineering, industry, agriculture, garden engineering, road engineering and other fields.

2. In the indoor and outdoor drainage pipeline engineering of industrial and civil buildings, the temperature of continuously discharged domestic sewage is not much higher than 40 ℃, and the temperature of instantaneous waste sewage is not much higher than 80 ℃. Industrial wastewater that does not rust dry pipes can be used.

Transport and installation

1. Wipe clean the pipe sockets and pipe fitting sockets before connection

2. Measure the depth of the socket and mark the pipe

3. Apply the adhesive, first coat the socket, then coat the socket, the coating is even and appropriate

4. Align the direction, insert into the marking part at a time, and rotate 1/4 turn

5. Wipe clean the excess adhesive at the interface

6. Set the glued pipe to stand and cut the solidified pipe at the interface: After the pipe is measured to a suitable length, it can be cut with a hand saw or machine. After cutting, the two sections should be kept flat. Use a butterfly file to remove the burrs and chamfer them. The angle should not be too large.