HDPE多孔梅花管
产品介绍
HDPE多孔梅花管是多孔管形状为梅花型,孔数从三孔到九孔不等,主要分为七孔梅花管和五孔梅花管,又称梅花管和蜂窒管。是以HDPE(高密度聚乙烯)为原料,经挤出机一次挤塑成型生产,各单孔壁相交,紧密熔界的一种线缆护套管材。这种管材的作用就是保护里面的线缆,对于电力电缆起到一个很好的保护作用,能够做到防水防潮,防污染,防止腐蚀性物体进入,使线路在使用的过程中非常的安全,线路寿命得到有效的延长,主要的是安全性得到有效的提高。同时由于它是一次性成型的一体化多孔护套管,所以施工方便,增加了预埋孔数,提高了施工速度,大大降低了工程单位的材料及施工成本。
产品信息/执行标准
YD/T841.5-2016地下通信管道用塑料管第5部分∶梅花管
产品名称
HDPE多孔梅花管
产品原料
PE聚乙烯
产品特性
多孔一体受力均匀阻燃绝缘穿缆轻快
产品颜色
白色多孔通体
产品用途
主要用于移动、铁通、联通网通等通信电缆护套管
执行标准
YD/T841.5-2016地下通信管道用塑料管第5部分∶梅花管
产品参数
HDPE多孔梅花管
管径32
壁厚mm:0.8、1.0、1.2
产品特点
特点关键词∶多孔一体、受力均匀、物理性能、密封性好、阻燃绝缘、耐温、挠曲度好、穿缆轻快
1、物理性能优越∶防水、防潮,抗老化。
2、HDPE多孔梅花管采用蜂窝型通体设计、具有优良的整体抗压结构,受力均匀。
3、产品采用承插连接头、接口处为喇叭型,方便套接,便于施工、连接密封性好。
4、采用硬聚氯乙烯树脂原料、具有耐酸性、抗老化和较好的阻燃性及绝缘性特点。
5、产品适用温度范围较大(-10℃-40℃),寒暑地区均能使用,梅花管使用寿命在埋深条件下大于30年以上。
6、挠曲度好∶由于聚氯乙烯的柔性,使管材具有一定的挠度,能轻松越过障碍物。
7、产品内壁摩擦阻力小,穿缆轻快,施工简便易行。
产品优势&细节展示
PRODUCTSUPERIORITY&SHOWDETAlLS
多孔一体、受力均匀、抗压性好
HDPE多孔梅花管采用蜂窝型通体设计,具有优良的整体抗压结构,受力均匀。
物理性能优异,易于施工
HDPE梅花管防水、防潮,抗老化。产品方便套接,便于施工、连接密封性好。
低温抗冲击性能优异
PE的低温脆化温度极低,可在-20℃~60℃温度范围内安全使用。冬季施工时因材料冲击性好,不会发生管子脆裂。
韧性好挠度好
PE管材是一种高韧性管材,其断裂伸长率超过50%。对基础不均匀的地面沉降和错位的适应能力非常强。抗震性好。小口径管材可任意弯曲
产品用途
主要用于移动、铁通、联通、网通、广电等通信电缆护套管。
运输安装
1、管道埋设地沟应按设计要求,施工操作尽可能平直,如沟底不平可铺上一层沙。埋管前应清除沟内的硬质物,防止管道变形。
2、管道连接将管材状定位筋朝上放置,将端部管材外壁清理干净。根据实际的人井的长度用钢锯锯断,截面整齐。对接完成之后,伸入人井的一端要求用管塞塞好,防止异物侵入。
3、初次安装使用本产品者,可在铺设第一段(两个人井之间的距离时)先不要回填土。用穿缆器试穿一孔或两孔。
4、管子铺设好之后,应先用细沙或细十回填到温没管的高度,不可使管子悬空状态,然后回填其它泥土,禁止将大石头、大的干土块砸向管子。
5、当管线经过受外刀酸坏较严重的地段时,在接孔部分用水泥混泥土包覆,以保计其绝对安全。
标签∶HDPE多孔梅花管
HDPE Porous Plum Blossom Tube
product description
HDPE porous plum tube is a plum-shaped porous tube, the number of holes varies from three holes to nine holes, mainly divided into seven-hole plum tube and five-hole plum tube, also known as plum tube and bee suffocation tube. It is a kind of cable sheath material with HDPE (high-density polyethylene) as the raw material and one-time extrusion molding produced by an extruder. The walls of each single hole intersect and the boundary is tightly melted. The function of this kind of pipe is to protect the cables inside, and play a very good protective role for the power cables. It can be waterproof, moisture-proof, pollution-proof, and prevent corrosive objects from entering, making the line very safe during use. The service life of the line has been effectively extended, and the main thing is that the safety has been effectively improved. At the same time, because it is a one-time molded integrated porous protective casing, it is convenient to construct, increase the number of embedded holes, increase the construction speed, and greatly reduce the material and construction cost of the engineering unit.
Product Information/Executive Standard
YD/T841.5-2016 Plastic Pipe for Underground Communication Pipe Part 5: Plum Blossom Pipe
product name
HDPE Porous Plum Blossom Tube
Product raw materials
PE polyethylene
Product Features
The porous body is uniformly stressed, and the flame-retardant insulation is easy to pass through
color of the product
White porous body
Product Usage
Mainly used for communication cable sheath of China Mobile, Tietong, China Unicom, etc.
Executive standard
YD/T841.5-2016 Plastic Pipe for Underground Communication Pipe Part 5: Plum Blossom Pipe
Product parameter
HDPE Porous Plum Blossom Tube
Pipe diameter 32
Wall thickness mm: 0.8, 1.0, 1.2
Features
Feature keywords: integrated porous, uniform force, physical properties, good airtightness, flame-retardant insulation, temperature resistance, good deflection, light cable threading
1. Superior physical properties: waterproof, moisture-proof and anti-aging.
2. HDPE porous plum blossom pipe adopts honeycomb-shaped whole body design, has an excellent overall compressive structure, and the force is even.
3. The product adopts socket connector, and the interface is horn type, which is convenient for socket connection, easy for construction, and good connection and sealing.
4. Using hard polyvinyl chloride resin raw materials, it has the characteristics of acid resistance, aging resistance, good flame retardancy and insulation.
5. The product has a large applicable temperature range (-10℃-40℃), and can be used in cold and hot areas. The service life of plum blossom tube is more than 30 years under the condition of buried depth.
6. Good deflection: Due to the flexibility of polyvinyl chloride, the pipe has a certain degree of deflection and can easily cross obstacles.
7. The inner wall of the product has small frictional resistance, the cable is threaded lightly, and the construction is simple and easy.
Product advantages & details
PRODUCTSUPERIORITY&SHOWDETAlLS
Porous in one body, uniform force, good compression resistance
The HDPE porous plum blossom pipe adopts a honeycomb-shaped whole body design, which has an excellent overall compressive structure and uniform stress.
Excellent physical properties, easy to construct
HDPE plum blossom pipe is waterproof, moisture-proof and anti-aging. The product is convenient for socketing, easy for construction, and good connection and sealing.
Excellent low temperature impact resistance
The low temperature embrittlement temperature of PE is extremely low, and it can be used safely in the temperature range of -20℃~60℃. Due to the good impact of the material during construction in winter, the pipe will not be brittle.
Good toughness and good deflection
PE pipe is a kind of high tenacity pipe, its elongation at break exceeds 50%. The ability to adapt to uneven ground settlement and dislocation of the foundation is very strong. Good shock resistance. Small diameter pipe can be bent arbitrarily
Product Usage
It is mainly used to protect the bushings of communication cables such as China Mobile, China Railcom, China Unicom, Netcom, and Radio and Television.
Transport and installation
1. The buried trench of the pipeline should be in accordance with the design requirements, and the construction operation should be as straight as possible. If the bottom of the trench is uneven, a layer of sand can be spread. Before burying the pipe, the hard objects in the trench should be removed to prevent the pipe from being deformed.
2. For pipe connection, place the pipe-shaped positioning rib upward, and clean the outer wall of the end pipe. According to the length of the actual manhole, it is cut with a hacksaw, and the section is neat. After the docking is completed, the end that extends into the manhole needs to be plugged with a pipe plug to prevent foreign matter from intruding.
3. If you install and use this product for the first time, do not backfill the soil before laying the first section (the distance between two manholes). Try one or two holes with a cable passer.
4. After the pipe is laid, it should be backfilled with fine sand or fine sand to the height of the warm pipe. The pipe should not be left in the air, and then backfilled with other soil. It is forbidden to hit the pipe with large rocks or large dry soil.
5. When the pipeline passes through a section that is severely damaged by external knife acid, the connection part shall be covered with cement concrete to ensure its absolute safety.
Tag: HDPE Porous Plum Blossom Tube
发表评论 取消回复